First Time Registration (Quick Setup) - Restaurants

You can perform the following setup from the terminal itself. The quick setup is used when:
  1. You only require to use 1 terminal or
  2. You have many terminals but all using the same menu or pricelist 
Note: Menu and pricelist are the same. It is a terminology which refers to the list of items that the restaurant sold. In the terminal, this menu is referred as pricelist).

Below is the step by step process that you need to perform for quick setup:

Step 1 - If this is your first time, we recommend that you perform terminal update. Refer to this link page on how to do terminal update.


Step 2 - Create profile and terminal assignment. A profile is used to identify a set of items this terminal will be used for. For quick setup, you will be using Default Profile.
  1. Press F2, then
  2. Press Enter to go to the terminal's next screen
  3. Select L2 - First Time Reg., then
  4. Press L1 - Select Profile, then
  5. The terminal will show Default, press L1
  6. Then, Assign name to the terminal. Once done, press Enter
  7. System then successfully assign the terminal to the Default profile.


Step 3 - Create authorizer (Master) and waiter staff cards. You need to do 2 tasks:
  1. To format the card first
  2. To add staff (assigning the staff card)
  1. Press F2, then
  2. Press Enter to go to the terminal's next screen
  3. Select L1 - Card Admin
  4. Choose L4 - Format /w Pin to format the card
  5. Once done, go to Card Admin, press Enter to the terminal's next screen
  6. Add staff card - L1. This is to create or add waiter staff details and card assignment
  7. Add master card - L3. This is to create or add Master (authorizer) details and card assignment




Step 4 -  To create or add items sold into the menu or pricelist
  1. Press F2, then
  2. Select Files Update - L3
  3. Then, select L3 - Pricelists
  4. Follow the on screen instructions to add the items. You can refer at this page for details steps.
 


Once Step 1 to 4 completed, your terminal is now ready to be used.

Note: If you have 2 or more terminals but all of them will use the same menu or pricelist, you just repeat Step 1 to 2 for the other terminals.